How to Remodel a Fireplace
The order the work happens in, and what to settle before anything is ordered. The thing every seat in the room is already pointed at.
BeforeAfter
- 1
Work out what the room has to do
A fireplace remodel is surround, hearth and mantel — and, increasingly, undoing a television mounted above it. The firebox usually stays; what changes is the material facing it, its proportions, and whether the chimney breast keeps its alcoves or loses them.
- 2
Decide what is actually changing
On this project the work touches surround material, hearth, mantel and shelf, chimney breast profile — and often flanking alcoves or joinery and firebox insert. Settling that list first is what stops a remodel growing sideways once it has started.
- 3
Hold the dimensions
Whatever the finishes, these do not move. Leave 16in of clear hearth in front and 8in to each side of the opening. A mantel sits at 54in for a standard opening; higher and the room stretches, lower and it crowds the fire. Keep alcove joinery to 18in deep — beyond that it projects past the chimney breast and reads as lumpy.
- 4
Plan the light before the finishes
Let the fire be the brightest thing in its half of the room. Wash the chimney breast with something low and warm so the material reads after dark, put picture lights on anything hung above, and keep downlights off the surround — they flatten stone and make tile look like a bathroom.
- 5
Check it against the room you have
Photograph the space and render it before anything is ordered. A Standard run costs 4 credits and a new account starts with 4, so the whole thing can be seen before a single decision is paid for.
Questions
- What should I decide first in a fireplace remodel?
- A fireplace remodel is surround, hearth and mantel — and, increasingly, undoing a television mounted above it. The firebox usually stays; what changes is the material facing it, its proportions, and whether the chimney breast keeps its alcoves or loses them.
- What goes wrong most often?
- A television mounted above the fire, too high to watch and too hot to be there. A surround material chosen from a sample rather than seen at full height.
- Will it work in a small fireplace?
- In a small room, taking the surround material to the ceiling makes the wall taller rather than busier — a mantel with a gap of blank wall above it does the opposite and cuts the height in half.
- Can I see it on my own fireplace before starting?
- Yes — photograph the space and run it through the Studio. It is generated imagery, so compare the render against your photo rather than treating it as a plan.