Moroccan entryway remodel
Tile, arch and lantern, layered until the room is enclosed. What that means for a entryway remodel — what changes, the palette, the dimensions that still have to hold — and how to try it on a photo of your own room.
What the work actually covers
An entryway remodel is small and disproportionately visible. New flooring, a proper light, somewhere for keys and coats, and a wall treatment that says the house was thought about — done in a footprint most people walk through without stopping. Taken in Moroccan, the elements on the list — flooring at the threshold, console or bench, mirror, overhead light — are the ones carrying the look, and tile and arch. zellige and a shaped opening carry the whole style, and no textile substitutes for them.
Making a entryway remodel read as Moroccan
Moroccan interiors are pattern applied architecturally — zellige tile, carved plaster, arched niches — rather than pattern applied as decoration. The remodel is tiling and openings; the textiles come afterwards. Against a entryway remodel that means the pieces doing the visible work are low banquette seating, pierced metal lanterns, berber or beni ourain rug, sitting inside whatever the layout already demands.
Palette and materials
Moroccan holds a narrow range: Sand White, Saffron, Rust, Teal Glaze, Indigo, with materials running to zellige tile, carved plaster and wood, pierced brass, wool rugs and poufs. On a entryway remodel the discipline matters most wherever the largest uninterrupted surface is — keep that inside the range and every smaller decision gets easier.
Dimensions that do not move
A style choice never overrides the geometry. Whatever the finishes, the work still has to hold: Leave the full door swing plus 12in clear — an entry you have to step around is a permanent irritation. A console at 30–34in high and 12–14in deep fits without narrowing the route. Hang a mirror with its centre at 60in, opposite or adjacent to the light, never behind it.
Lighting
Pierced metal lanterns throwing patterned shadow. Light as another form of pattern. One good fixture at the right height beats three mediocre ones. Hang a pendant with 7ft of clearance beneath it, and if the ceiling is low use a flush fixture with a diffuser rather than a shallow pendant that everyone taller than 6ft notices.
Where it usually goes wrong
The style breaks on sparse modern furniture, cool white walls with no texture, recessed downlights. Independent of any style, this project is most often let down by a console deep enough to catch the door. a pendant hung at head height in a single-storey entry.
If the space is tight
Where there is no room for furniture, take the wall instead: a full-height panelled wall with a rail of hooks and a slim shelf gives an entry identity without occupying a single inch of floor. Tile and arch. Zellige and a shaped opening carry the whole style, and no textile substitutes for them.
Questions
- Does Moroccan work for a small entryway?
- Where there is no room for furniture, take the wall instead: a full-height panelled wall with a rail of hooks and a slim shelf gives an entry identity without occupying a single inch of floor. Moroccan is helped by that, since tile, arch and lantern, layered until the room is enclosed.
- Which surface matters most in a moroccan entryway?
- Tile and arch. Zellige and a shaped opening carry the whole style, and no textile substitutes for them.
- Can I see this on my own entryway?
- Yes. Upload a photo and the Studio remodels it in Moroccan while holding your walls, windows and camera angle exactly where they are. New accounts get 4 credits and a Standard run costs 4, so there is a full render before anything is paid for.
- What ruins a moroccan scheme?
- Usually sparse modern furniture and cool white walls with no texture.