Eclectic open concept remodel
Deliberate mixing, held together by one repeated thread. What that means for a open concept remodel — what changes, the palette, the dimensions that still have to hold — and how to try it on a photo of your own room.
What the work actually covers
An open concept remodel is a single decision with a long tail. The wall comes out and the two rooms become one — but the beam has to go somewhere, the flooring has to reconcile, the lighting has to work as one plan, and the noise has nowhere left to stop. Taken in Eclectic, the elements on the list — structural wall and beam, flooring across both rooms, ceiling line, unified lighting plan — are the ones carrying the look, and the repeated element. without one, eclectic is just unresolved.
Making a open concept remodel read as Eclectic
Eclectic only works with a rule: a repeated colour, a consistent frame, a shared scale. A remodel supports it by keeping the shell quiet and consistent, so the mixing happens in the objects rather than in the architecture. Against a open concept remodel that means the pieces doing the visible work are gallery wall of mismatched frames, one antique statement piece, modern seating as counterweight, sitting inside whatever the layout already demands.
Palette and materials
Eclectic holds a narrow range: Bone, Ochre, Rust, Petrol, Ink, with materials running to mixed timbers, vintage textiles, brass and iron together, ceramic. On a open concept remodel the discipline matters most wherever the largest uninterrupted surface is — keep that inside the range and every smaller decision gets easier.
Dimensions that do not move
A style choice never overrides the geometry. Whatever the finishes, the work still has to hold: Decide early whether the beam is flush or dropped — a dropped beam is not a failure, it keeps the zones legible. Run flooring in one direction across the whole space; a change of direction at the old wall line reads as a scar. Keep 42in of route from the kitchen work zone through to the seating.
Lighting
Mixed deliberately — one modern, one antique, one sculptural — all warm. One plan, several circuits. The kitchen half needs task light the living half must never be subjected to, so switch them separately and let the transition happen through a shared ambient layer rather than a hard line.
Where it usually goes wrong
The style breaks on mixing with no repeated element, matching sets, even distribution — eclectic needs a focal point. Independent of any style, this project is most often let down by the wall removed and the two lighting schemes left in place, so the ceiling shows exactly where the wall was. flooring changed direction at the old wall line.
If the space is tight
Opening up a small house does not always help. Two 11ft rooms can work better than one 22ft room with no walls to place anything against — a wide cased opening often gets the light and sightlines without losing the wall. The repeated element. Without one, eclectic is just unresolved.
Questions
- Does Eclectic work for a small open concept?
- Opening up a small house does not always help. Two 11ft rooms can work better than one 22ft room with no walls to place anything against — a wide cased opening often gets the light and sightlines without losing the wall. Eclectic is helped by that, since deliberate mixing, held together by one repeated thread.
- Which surface matters most in a eclectic open concept?
- The repeated element. Without one, eclectic is just unresolved.
- Can I see this on my own open concept?
- Yes. Upload a photo and the Studio remodels it in Eclectic while holding your walls, windows and camera angle exactly where they are. New accounts get 4 credits and a Standard run costs 4, so there is a full render before anything is paid for.
- What ruins a eclectic scheme?
- Usually mixing with no repeated element and matching sets.