Industrial kitchen remodel
Structure left visible, because it was worth looking at. What that means for a kitchen remodel — what changes, the palette, the dimensions that still have to hold — and how to try it on a photo of your own room.
What the work actually covers
A kitchen remodel is really three decisions stacked on each other: where the sink, range and fridge sit, what the cabinets look like, and what the surfaces are made of. Move the first and the project doubles. Change only the last two and most kitchens still look completely different. Taken in Industrial, the elements on the list — cabinet doors and boxes, countertops, backsplash, sink and tap — are the ones carrying the look, and the ceiling. painted joists, exposed ductwork and surface conduit are what make a room read industrial, and a plasterboard ceiling ends the conversation.
Making a kitchen remodel read as Industrial
Industrial keeps the bones on show: brick, steel, concrete, services running openly across the ceiling. In a remodel it inverts the usual instinct — the work is deciding what not to cover, then finishing the exposed elements properly so they read as chosen. Against a kitchen remodel that means the pieces doing the visible work are steel-and-timber shelving, leather chesterfield or club chair, factory pendant lights, sitting inside whatever the layout already demands.
Palette and materials
Industrial holds a narrow range: Cement, Weathered Brick, Oxidised Steel, Saddle Leather, Iron, with materials running to exposed brick, blackened steel, reclaimed timber, polished concrete. On a kitchen remodel the discipline matters most wherever the largest uninterrupted surface is — keep that inside the range and every smaller decision gets easier.
Dimensions that do not move
A style choice never overrides the geometry. Whatever the finishes, the work still has to hold: Keep the sink, range and fridge within a triangle whose sides total 13–26ft — tighter feels cramped, wider means walking. Leave 42in of clear floor in a one-cook kitchen and 48in where two people work. Allow at least 15in of landing space beside the fridge on the handle side.
Lighting
Metal shades and visible filaments, hung low over the surfaces that matter. Bare fittings suit the style; bare bulbs at ceiling height do not. Under-cabinet strips first — they do the actual work and no ceiling fixture replaces them. Then a general layer on dimmers, and pendants over an island sized so they clear sightlines at 30–36in above the counter.
Where it usually goes wrong
The style breaks on wall-to-wall carpet, fussy soft furnishings, painted-over brick in a room already short on warmth. Independent of any style, this project is most often let down by new cabinets in the same bad layout, so the kitchen looks fixed and still works badly. a backsplash chosen against a countertop sample rather than the actual slab.
If the space is tight
In a galley under 8ft wide, run cabinets to the ceiling on one side only and keep the opposite run open. Two facing walls of upper cabinets is what makes a narrow kitchen feel like a corridor. The ceiling. Painted joists, exposed ductwork and surface conduit are what make a room read industrial, and a plasterboard ceiling ends the conversation.
Questions
- Does Industrial work for a small kitchen?
- In a galley under 8ft wide, run cabinets to the ceiling on one side only and keep the opposite run open. Two facing walls of upper cabinets is what makes a narrow kitchen feel like a corridor. Industrial is helped by that, since structure left visible, because it was worth looking at.
- Which surface matters most in a industrial kitchen?
- The ceiling. Painted joists, exposed ductwork and surface conduit are what make a room read industrial, and a plasterboard ceiling ends the conversation.
- Can I see this on my own kitchen?
- Yes. Upload a photo and the Studio remodels it in Industrial while holding your walls, windows and camera angle exactly where they are. New accounts get 4 credits and a Standard run costs 4, so there is a full render before anything is paid for.
- What ruins a industrial scheme?
- Usually wall-to-wall carpet and fussy soft furnishings.