Victorian living room remodel
High ceilings, deep colour and ornament at every junction. What that means for a living room remodel — what changes, the palette, the dimensions that still have to hold — and how to try it on a photo of your own room.
What the work actually covers
Living rooms are remodelled for three reasons: the fireplace is dated, the floor is tired, or the lighting is a single fitting in the middle of the ceiling. Address those and the furniture arrangement usually sorts itself out, because it was the room fighting back, not the sofa. Taken in Victorian, the elements on the list — fireplace and surround, flooring, lighting and switching, built-in joinery — are the ones carrying the look, and cornice and ceiling height. restore the plasterwork and the room becomes victorian; skip it and no colour will.
Making a living room remodel read as Victorian
Victorian remodelling is largely restoration: cornice, ceiling rose, picture rail, panelled doors and deep skirting, usually reinstating what was stripped in the 1970s. The colour palette can then go much darker than most people expect, because the ceiling height carries it. Against a living room remodel that means the pieces doing the visible work are carved fireplace with tiled surround, chesterfield or button-back sofa, dado rail with paper above, sitting inside whatever the layout already demands.
Palette and materials
Victorian holds a narrow range: Parchment, Antique Gold, Deep Teal, Bottle Green, Burgundy, with materials running to carved mahogany and walnut, patterned wallpaper, velvet and brocade, cast iron. On a living room remodel the discipline matters most wherever the largest uninterrupted surface is — keep that inside the range and every smaller decision gets easier.
Dimensions that do not move
A style choice never overrides the geometry. Whatever the finishes, the work still has to hold: Keep seating within 8ft of each other or the room stops holding a conversation. Build joinery to 18in deep flanking a chimney breast — deeper and it projects past the breast awkwardly. Leave a 32in route through the room that does not pass between the seating and the fire.
Lighting
Warm and layered — wall lights at picture-rail height, lamps below, a central fitting used sparingly. The single most common living room fault is one central pendant. Replace it with four or five low-output sources at different heights — a floor lamp by each seat, a picture light, something on a shelf — and put the lot on one dimmed circuit.
Where it usually goes wrong
The style breaks on bare white walls, flat-pack furniture, downlights. Independent of any style, this project is most often let down by a television mounted above the fire, too high to watch comfortably. joinery built deeper than the chimney breast so the wall reads as lumpy.
If the space is tight
Removing a chimney breast is the one structural move that reliably transforms a small living room, because it returns two alcoves' worth of wall and lets furniture sit flat. It is also the one people regret skipping. Cornice and ceiling height. Restore the plasterwork and the room becomes Victorian; skip it and no colour will.
Questions
- Does Victorian work for a small living room?
- Removing a chimney breast is the one structural move that reliably transforms a small living room, because it returns two alcoves' worth of wall and lets furniture sit flat. It is also the one people regret skipping. Victorian is helped by that, since high ceilings, deep colour and ornament at every junction.
- Which surface matters most in a victorian living room?
- Cornice and ceiling height. Restore the plasterwork and the room becomes Victorian; skip it and no colour will.
- Can I see this on my own living room?
- Yes. Upload a photo and the Studio remodels it in Victorian while holding your walls, windows and camera angle exactly where they are. New accounts get 4 credits and a Standard run costs 4, so there is a full render before anything is paid for.
- What ruins a victorian scheme?
- Usually bare white walls and flat-pack furniture.