Traditional living room remodel
Symmetry, mouldings and furniture that matches on purpose. What that means for a living room remodel — what changes, the palette, the dimensions that still have to hold — and how to try it on a photo of your own room.
What the work actually covers
Living rooms are remodelled for three reasons: the fireplace is dated, the floor is tired, or the lighting is a single fitting in the middle of the ceiling. Address those and the furniture arrangement usually sorts itself out, because it was the room fighting back, not the sofa. Taken in Traditional, the elements on the list — fireplace and surround, flooring, lighting and switching, built-in joinery — are the ones carrying the look, and trim height and profile. traditional depends on the depth of the mouldings, which is why flat modern skirting undoes it instantly.
Making a living room remodel read as Traditional
Traditional is built out of profiles: skirting, architrave, panelling, cornice. A remodel reaches it by putting the mouldings back — usually the exact elements a previous renovation stripped out — and arranging the room symmetrically around a focal point. Against a living room remodel that means the pieces doing the visible work are rolled-arm or camelback sofa, wingback chairs in a pair, console table with mirror above, sitting inside whatever the layout already demands.
Palette and materials
Traditional holds a narrow range: Parchment, Sage, Mahogany, Navy, Burgundy, with materials running to cherry and mahogany, tufted and rolled-arm upholstery, crown moulding and wainscot, brass hardware. On a living room remodel the discipline matters most wherever the largest uninterrupted surface is — keep that inside the range and every smaller decision gets easier.
Dimensions that do not move
A style choice never overrides the geometry. Whatever the finishes, the work still has to hold: Keep seating within 8ft of each other or the room stops holding a conversation. Build joinery to 18in deep flanking a chimney breast — deeper and it projects past the breast awkwardly. Leave a 32in route through the room that does not pass between the seating and the fire.
Lighting
Table lamps and wall lights doing most of the work, a central fixture doing almost none. Warm throughout. The single most common living room fault is one central pendant. Replace it with four or five low-output sources at different heights — a floor lamp by each seat, a picture light, something on a shelf — and put the lot on one dimmed circuit.
Where it usually goes wrong
The style breaks on asymmetric layouts, industrial or raw materials, cool white light. Independent of any style, this project is most often let down by a television mounted above the fire, too high to watch comfortably. joinery built deeper than the chimney breast so the wall reads as lumpy.
If the space is tight
Removing a chimney breast is the one structural move that reliably transforms a small living room, because it returns two alcoves' worth of wall and lets furniture sit flat. It is also the one people regret skipping. Trim height and profile. Traditional depends on the depth of the mouldings, which is why flat modern skirting undoes it instantly.
Questions
- Does Traditional work for a small living room?
- Removing a chimney breast is the one structural move that reliably transforms a small living room, because it returns two alcoves' worth of wall and lets furniture sit flat. It is also the one people regret skipping. Traditional is helped by that, since symmetry, mouldings and furniture that matches on purpose.
- Which surface matters most in a traditional living room?
- Trim height and profile. Traditional depends on the depth of the mouldings, which is why flat modern skirting undoes it instantly.
- Can I see this on my own living room?
- Yes. Upload a photo and the Studio remodels it in Traditional while holding your walls, windows and camera angle exactly where they are. New accounts get 4 credits and a Standard run costs 4, so there is a full render before anything is paid for.
- What ruins a traditional scheme?
- Usually asymmetric layouts and industrial or raw materials.